Description
What the Kinhank G1 is
The G1 is a small Android TV box built on the Amlogic S905X4-J, with 4 GB of RAM, 32 GB of storage and support for TF card expansion. It measures 3.9 by 3.9 by 0.79 inches and the packed weight is 1.37 pounds. The listing describes it as an Android TV 14 device from 2025 and ships it with a voice remote.
The claim that separates it from most boxes in this category is certification. Kinhank states the G1 is Google and Netflix dual certified. That is a specific and checkable claim rather than marketing language, and if it holds it is the most important line in the listing.
Why certification matters more than the processor
Most Android boxes sold in this bracket are not certified devices. They run Android rather than Android TV, they side load app stores, and they carry a low Widevine security level, which is the digital rights management system that streaming services use to decide what resolution to send. The practical result is familiar to anyone who has bought one: Netflix either refuses to install or delivers standard definition video on a box advertised as 4K.
Google certification means the device passes Google’s compatibility requirements and can carry the Play Store and Android TV properly. Netflix certification means the service will deliver its full resolution to the device. Between them they answer the single biggest question about a box like this, and they are the reason to consider the G1 over a higher specified but uncertified competitor such as the Ugoos AM6B Plus, which offers more storage and gigabit Ethernet but makes no certification claim at all.
The usual caution still applies. Which services work, at what resolution, and for how long is decided by the service providers rather than by the hardware maker, and certification is a point in time status that can change across firmware and platform versions. It should be verified at the time of purchase rather than assumed for the life of the device.
Codecs, HDR and networking
The G1 supports AV1 decoding, which Kinhank describes as roughly 30 percent more efficient than H.265 or VP9. That is the important forward looking specification: AV1 is increasingly used by streaming services because it delivers the same picture at a lower bitrate, and hardware AV1 decoding is what allows a low powered box to play it without stuttering. A device without it falls back to software decoding or simply cannot play the stream.
HDR support is listed as HDR10+ alongside Dolby Vision and Dolby Digital Plus. That is a broad set of formats for a box at this level, and it means the player can pass the appropriate signal to a capable television such as the Hisense U6 series. As always, the box passes the format along; the panel decides what it can actually show.
Networking is Wi-Fi 6 on 2.4 and 5 GHz plus Bluetooth 5.0. Notably, no Ethernet port is mentioned anywhere in the listing. For a device aimed at 4K playback that is a real omission, and it means the wireless connection has to carry everything.
Built-in Chromecast allows content to be sent from a phone, tablet or laptop, and the voice remote covers search, playback and smart home control.
Storage, expansion and the small chassis
Thirty two gigabytes is generous for a certified Android TV device. Many mainstream streaming players ship with 8 or 16 GB, which fills quickly once a handful of apps and their cached data are installed, and the usual outcome is deleting one app to install another. Thirty two gigabytes plus TF card expansion removes that problem for most households.
The chassis is small at 3.9 inches square and under an inch thick, which means it disappears behind a television or under a soundbar. Small chassis do raise a thermal question that this listing does not address: sustained 4K decoding generates heat, and a thin sealed box has limited surface area to shed it. No cooling arrangement is described and no thermal specification is given, so it is worth leaving air around it rather than burying it inside a closed cabinet.
Highlights
- Google and Netflix certification claimed, which is unusual in this category.
- Amlogic S905X4-J with 4 GB of RAM and 32 GB of storage.
- TF card expansion for additional storage.
- AV1 hardware decoding alongside 4K HDR10+ at 60 frames per second.
- Dolby Vision and Dolby Digital Plus support.
- Wi-Fi 6 on both bands plus Bluetooth 5.0.
- Voice remote and built-in Chromecast.
- Two year free replacement policy with lifetime technical support.
Things To Consider
- No Ethernet port is mentioned in the listing, so everything depends on the wireless connection.
- Certification claims should be verified at the time of purchase. They are a status, not a permanent property.
- No Android security patch level is stated despite the Android 14 claim.
- The color name field reads red, which may not match the unit shown in the images.
- No USB port count is published, and no port list appears anywhere.
- No cooling arrangement or thermal rating is described for a sealed chassis under an inch thick.
- Only the packed weight and outer dimensions are given.
- Kinhank is not a well known brand, and the two year replacement policy depends on the seller remaining reachable.
- Service and app availability on any streaming device changes over time and is controlled by the service providers.
Who it suits
This is the box to consider for someone who wants mainstream streaming apps to work properly on a small, cheap Android device, rather than one who wants maximum hardware for local media playback. Certification, AV1 decoding and Wi-Fi 6 together make it a sensible general purpose player, and the voice remote and Chromecast support make it usable by a household rather than by an enthusiast.
It is the wrong choice for anyone with a large local media library, who needs wired networking and more storage. Those buyers should compare the Zidoo Z3000 Pro and the Formuler Z10, and read across the streaming media players category before deciding.
